| EASY
APPLICATION |
| It is easy to
apply by spraying with Salt-Away's Mixing Unit and Salt
Blaster, a pressure washer or the ready-to-use Salt-Away
spray items. Items can also be immersed into a Salt-Away/water
solution to be soaked or be protected from corrosion. |
| SALT-AWAY
ENGINE FLUSH |
Connect Salt-Away's
mixing unit to flushing muffs or other flush-out device.
Wait to see foaming action (salt-removing agent) coming
out exhaust and flush for 20-30 seconds.
Turn off engine and leave Salt-Away inside engine to break
down salt build-up and to protect from rust and corrosion. |
|
| SALT-AWAY’S
SALT BUILD-UP REMOVAL PROGRAM FOR ALL EXTERNAL SURFACE
APPLICATIONS |
Notice: These
instructions are intended for use with Salt-Away only.
Using these instructions with other products may cause
damage and may not produce desired results. Salt-Away
is the most concentrated salt removing product on the
market and has produced desired results for many customers. |
Salt-Away’s
development of the formula included designing the product
with the highest concentration of ingredients meant to
be diluted at very high ratios and still be effective.
For removing external salt build-up, Salt-Away works best
by completely spraying the equipment 4-6 times in sequence,
waiting at least 24 hours between applications.
|
|
| Do
not rinse off. Rinsing ok after the last application,
if desired. Applying a higher concentrated solutions of
Salt-Away will not necessarily work better. |
The number of
applications may need to decrease or increase, depending
on results.
It is reasonable to expect that that not all situations
will respond to this method of salt build-up removal.
Removing salt from your equipment after every exposure
will prevent this build-up.
Remember that Salt-Away is a maintenance salt-removing
product and cannot repair past damage to any surface caused
by salt corrosion, but can prevent future damage.
Recommended product for external salt build-up removal
program: COMBO
KIT. |
